HOVER HEARTS ATV-EA500 MONSTER

A: It’s a compact battery charger for ATV/UTV batteries. Plug it into a household power source, connect the clamps, and it will begin charging to help you reach a fully charged battery and restore performance. It’s ideal to maintain charge between rides and improve battery life.

Q: Is it a maintainer as well as a charger?

A: Yes—used after a full charge, it can function as a light maintainer/trickle charger to avoid self-discharge during storage (e.g., over the winter). Always check your battery’s type and follow safe setup instructions.

Q: Is it compatible with lithium batteries?

A: Many chargers are not created equal. This unit is best suited to standard powersports lead chemistries; if you use lithium batteries (LiFePO₄), select the lithium settings/options only if clearly stated on the label. If the label doesn’t accept lithium, we recommend a lithium-specific battery charger to ensure full capacity and protect the battery health.

Q: What about temperature and safety for lithium?

A: Lithium has different low-temperature and protection needs. Always decide based on your pack’s BMS guidance and the charger’s manual—this helps ensure safe charging and avoid overcharging.

Q: Can I leave it connected as a trickle charger every day?

A: Use it like a trickle charger or maintainer only on compatible chemistries (see label). For long storage, hook up, verify charging data/status lights, and re-check every few days. Unplug if you notice heat, corrosion, or wiring issues.

Q: Will it quickly bring up a low battery?

A: It can quickly bring small ATV packs back to a usable state, but recovery time varies with capacity, type, and depth of discharge. Severely discharged packs may need a shop device or replacement.


Q: Is this the same as a Battery Tender-style unit?

A: Functionally similar (charge + float), but brand-to-brand features differ. Some “battery tender” models add extra protections or modes. Compare product details and choose what fits your system and budget on the market.

Q: Will it work on motorcycles or a car starter battery?

A: It’s sized for powersports (motorcycles, ATV) packs. While it can top up a small starter battery, large car/deep cycle batteries may take too long; use an automotive-rated charger for those.

Q: Which ATV battery types are supported?

A: Designed primarily for sealed powersports lead chemistries—AGM and gel—with typical ATV capacity ranges. Always confirm compatible chemistry and type on your battery label before you buy and use.

Q: Any setup tips to protect my ATV battery and wiring?

A: Turn off the device, connect positive to positive and negative to negative, then plug into the power source. Keep clamps clean to prevent corrosion, place the charger where it can work with airflow, and never charge a damaged pack. Good habits save time and money.
Q: Does it support AGM and gel lead-acid packs?

A: Yes—AGM and gel are the most common ATV lead-acid types. Use the correct mode if the charger has settings; this helps reach full capacity safely and extends service life.

Q: What if I’m unsure about my battery type?

A: What if I’m unsure about my battery type? Look at the battery label (AGM/gel/lithium), or contact support with a photo. We’ll help you choose the right charger and any install accessories/parts you might need.